• State-of-the-Art Hydraulic Design

• Simple Operation with the Push of a Button

Electric Hydraulic Dock Leveler is ideal for high usage dock areas.

This Dock Leveler Easy to operate unit. Operator pushes and holds the "raise" button which activates the hydraulic pump and raises the deck. When the deck reaches the raised position the lip of the Dock Leveler automatically extends. The operator releases the "raise" button and deck descends to rest on the trailer. Control box includes red emergency stop button standard. When the truck pulls away, the Dock Leveler deck descends to full down position, trips the limit switch and returns automatically to the level support cross traffic position.

Dock Leveler is Available in 115/208/230V, 1 phase, or 208/230/460V, 3 phase power options. Includes (2) laminated bumpers and a service range of +/- 12". Capacities available up to 80,000 lbs

Specifications:

Dock Leveler Pit width is 86 inches
Dock Leveler Pit length is 110 inches
Dock Leveler Pit depth is 24 inches at front, 23 3/4 inches at back
Dock height is 48" (standard)
Vertical service range of Dock Leveler is 12 inches above & 12 inches below dock
Standard capacity is 20,000lbs, upgradeable to 80,000lbs

**Single axle capacity not to exceed 70% of load

All structual steel construction; welding meets AWS, design, engineering and fabrication complies with O.O.C. Comm. Std. CS 202-56, OSHA, & ANSI MH14.1-1984

-Note: One 18/2 STO and 14/3 (For 1 Phase) or 14/4 (For 3 Phase) STO Cable (or equivalent)
-Must be provided by the intaller in order to complete the installation.