Home > Drake Items > Product Information
Drake RV-7 Solid-State Blue LED Illumination Kit NEW!
This add is for (1) Drake Drake RV-7 Solid-State Blue LED Illumination Kit you will need to add to your RV-7. the kit includes One PTO Blue LED Lamp Assembly with Full Installation Instruction Sheet.
Note: I also have the complete LED Kits for the TR-7 and R-7. Please see my other listings.
Simple to Install
Installation is straight forward and every attempt was made for ease of installation. Since internal wiring is performed this kit does require that the installer must be capable of basic soldering skills. If you've never soldered before, please find someone who has experience to assist you.
Drake has used blue filters since the days of the 4-Line equipment. This continued into the later 7-Line equipment including the TR7(A) transceiver and R7(A) receiver. The problem occurs in later years when the blue filters begin to change and the displays end up looking green. Since the meter and frequency displays are illuminated by incandescent lamps they emit a glow that leans toward the red end of the emission spectrum. Thus a blue filter being back lit by a yellow/red glowing filament will naturally result in a greenish illumination. In the past people would replace the blue filters with newer and perhaps darker blue filters. This was a step in the right direction, but you are still stuck with a light bulb that will eventually burn out and require replacement. In the TR7 transceiver the bulb that illuminates the analog frequency display requires the removal of the DR-7 digital readout board to access the bulb. This is not an enjoyable job and has the potential of damaging the DR-7 or other parts in the radio if the deinstall and install procedures are not followed closely. You will often see the analog display dark as the user never bothered to change a burnt out bulb.
Another problem area with the 7-Line equipment illumination is that Drake used small round glass #53 bayonet bulbs. Due to their small size they can not illuminate the total coverage area of the meter or analog display evenly. You will have light and dark areas.
To solve both the aforementioned shortcomings we have developed a Blue illumination kit to replace the existing incandescent bulbs provided with the 7-Line equipment. The kit consists of two custom manufactured LED lamps. Each lamp utalizes the latest in Surface Mount Technology (SMT) assembled on Flex PC Board. The internal lamp LED spacing was designed to provide a wide angle of light dispersion providing a very even illumination distribution across the meter or analog frequency display area. Each lamp assembly has a solid plastic diffusion lens attached to further distribute the light evenly. Since the LED's emit a true blue spectrum there is no green affect encountered with the incandescent bulbs. There is no need to replace or add additional gel filters.
Lamp assemblies install easily using integrated non-conductive slide-on clips. Thus no destructive changes are made to your equipment. This kit is fully reversible!
For Ebay Customers:
Due to recent rule changes and ebay's increased effort to prevent sellers from communicating with their customers outside the ebay message system, I am no longer permitted to list my email address or my web site in my ebay listings.
If you have any questions about this item or DISCOUNTS for this item, please click on the link below to go to my ebay "ME" page where all my contact information is listed.
Good Communication and Customer satisfaction is always our number one concern so feel free to contact me DIRECT via email or telephone. (Anytime before 9:00 PM CST for Phone Calls)
If you do purchase an ebay item from me and for some reason are not satisfied or have questions, PLEASE contact me right away and I will take care of it to your satisfaction, (rather than leaving negative or neutral feedback before I am made aware of a problem). I sell hundreds of pieces of used and new gear and it is possible I could miss something or make an occasional mistake, but I will always work to make sure you will be satisfied or I will refund your full payment including the shipping cost, so there is no risk you will be stuck with something that you do not want. I know there are many sellers that do not much care about your satisfaction but I am not one of them! Please consider this before you bid on my items and before leaving any negative or neutral feedback.
International sales welcome! If PAYPAL Payments that total over $250.00 USD are from an unverified account or an account outside the USA, The item MUST be shipped via USPS Express Mail, UPS, or Fed-Ex, with a signature upon delivery. (Not Priority Mail)